Xhorse VVDI2 Commander Full Version With All 13 Software Activated
VVDI2 Commander Key Programmer is a multifunctional automotive diagnostic platform designed for automotive maintenance such as key programming, module programming, diagnostics and more by VVDI.
VVDI2 Full Version Highlights:
1.Latest Version: V6.7.5 (V6.7.5 Software Download)
2.Free Update Online for Lifetime
3.Support VW, Audi, BMW and Porsche,PSA(PSA Software only support key learn and read pin code)
4.Free active the "pin, cs, mac authorization". After receive the VVDI2, pls just send us serial number to active.
5.VVDI2 Full Package with 13 all Softwares,No need to buy any other authorizations.
VVDI2 Commander Functions:
Xhorse VVDI2 Full Version Special Functions
Including all VVDI functions, improved and more stable
More vehicle coverage, multi Immo functions
New added plug-in function and reserved connectors to include all VVDI functions
VVDI 2 includes all the VVDI functions, the function of Tango, remote control generation and chip identification is improved, and also the coil’s stability has been enhanced.
More ever, users do no need to connect VVD2 with computer or other devices to identify chip or detect remote frequently.
Add more vehicle models
VVDI supports diagnostic function only for VAG groups, but VVDI2 has achieved multi brand vehicle diagnosis and supports part of vehicle immo programming function and software online upgrade.
VVDI2 can replace lots of customized devices. Users do not need to purchase specific OBD tool for specific vehicle makes which will save you a lot.
Plug-in function, reserved connectors
VVDI 2 can act as a multifunction programmer to connect plug-ins, and read & write IC and CPU data.
The core function is to detect the remote control frequency
Automatically identify chip type
Support multi-function on VW vehicles
Read BMW ISN
Remote control programmer
J2534 compatible adapter
1. Detect key frequency, automatically identify chip type
The test result can show on the main unit display, no need to connect computer
2. Support VAG vehicle diagnostic function
Read & write Immo4/Immo5 system
Program BCM remote
K-Line instrument immobilizer box
Program control unit
Unlock Immo1/Immo2 firmware protection
Support data manipulation tools
3. Support OBD functions on BMW vehicles.
Fix CAS computer
4. Key programmer
Program key chip
Generate specialized chips
Immobilizer data processing tool
Other key tools
Generate remote control
5. Passthru J2534 Introduction
With built-in switch matrix, it supports third-party diagnostic software including: ODIS, Toyota TIS techstream etc. To perform VVDI2 diagnostic function, third-party diagnostic software should be compatible with J2534 function.
VVDI 2 Transponder key programmer superiority:
VVDI technician has devoted themselves to VVDI free update online and update service in the pass five years. This is what VVDI has been widely respected and ranked as a power tool.
There is no doubt that the more power and high-end configuration VVD2 will inherit the fine traditions.
Apart from free update online service and system optimization, more powerful functions and vehicle models (Like Porsche) will soon be available via update. And other more functions, you name it…
VVDI2 goes beyond than VVDI in function, connectors and vehicle coverage etc. After all, VVDI belongs to locksmith tool while VVDI2 becomes a comprehensive locksmith device.
VVDI2 - BMW FEM/BDC system(function released and available, just no user manual)
Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "BMW E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-BMW
4.when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.（FEM 95128 chip, BDC 95256 chip）usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.
Xhorse VVDI2 Software Update to V6.7.5
Requires firmware upgrade to V6.7.5
1. Improvement for autodetect VAG immobilizer system
2. Improvement for update FRF, SGO file
1. Improvement for CAS3 key learning
Transponder Programmer V6.7.5
1. Improvement for make proximity remote
2. Immobilizer data tool:Asia->Hyundai->Santa Fe->2008-MPC5XX bugfix
3. Improvement for clone ID70/ID83
4. Special chip: Add new ID47 for GreatWall ORA
Copy 48 (96 bits) V6.7.5
Online Upate Tool V6.7.5
Quick Start V6.7.5
VVDI2 Package List:
1.VVDI 2 Main Interface
2.5th BDM Programmer
4.Remote Programmer (no need to buy SK184, included)