SVCI DOIP JLR DoiP VCI for Jaguar Land Rover 2005 - 2019 (Work with SDD and Pathfinder)

在庫あり. Item No. SP339

今買う: 61,135
¥28000-56000未満   1900円返し
¥56001-84000未満   3800円返し
¥84001-112000未満 5700円返し
¥112001以上 7600円返し

VXDIAG VCX-DoIP Porsche Piwis III 279,000円
C5 Star 診断機+パナソニックCF19 + V2019.5 SSD 82,000円

送料無料 エクスプレス配送サービス    配送時間:3-5営業日.詳細?
16CM*15CM*5CM     ( Inch: 6.3*5.91*1.97 )
7日以内に返品できますが、ただお客様は運賃を払います。 詳細?


The SVCI DoIP Vehicle Communication Interface (VCI) is designed for Jaguar and Land Rover diagnosis or programming with SDD or Pathfinder software.
I. Product Overview

The SVCI DoIP Vehicle Communication Interface (VCI) is used by professional technicians as an aid in diagnosing and repairing vehicle electrical and electronic systems. The SVCI DoIP is designed to connect the vehicle to a host PC computer application which achieve functions through the  SVCI DoIP for data transfer and Electronic Control Unit (ECU) reprogramming. Using the VCI Manager PC application software, The SVCI DoIP is capable of communicating over a USB cable.
The SVCI DoIP is a standard-based tool – supporting the SAE J2534 interface, and the ISO22900-2 Diagnostic-Protocol Data Unit (D-PDU) API. Fully support JLR diagnostic software SDD2 and Pathfinder, including diagnostic, ECU update, CCF configuration and all the functions of JLR.

1.1 Appearance and details
SVCI DoIP hardware has two LED lights. Different LED represent different status. The LED light on the left flashing green indicates that the equipment is working normally, The LED light flashing red light indicates that the firmware is being upgraded. The LED on the right always lights up to indicate that DoIP protocol is activated, The LED on the right is flashing, indicating that it is communicating with the DoIP protocol. As shown in the figure below.
1.2 SVCI DoIP kit contents
The SVCI DoIP base kit includes a USB cable, user manual, an OBD interface extension cord and a hardware needed to communicate with ECU of JLR vehicles.

1.3 Technical Specifications

Protocol Type Protocol name
Physical Layer l CANBUS Channel 1 at 125/250/500/1000kbps
l CANBUS Channel 2 at 125/250/500/1000kbps
l One UART channels (K & L Lines)
l One J1850
Communication  Layer l ISO9141
l ISO14230
l J1850 PWM(Ford SCP)
l ISO14229 JLR Powertrain CANBUS
l ISO14229 JLR Body CANBUS
l ISO14229 JLR Chassis CANBUS
l ISO14229 JLR Comfort CANBUS
l ISO13400 DoIP
Others l Pin voltage Measurement
l Programming Voltage Generator
l Internal Temperature Sensor
l Power through DLC or USB Type B Connector

1.4Supported vehicles list
Software Name Vehicle Name Model Years Support’s functions
SDD2 Land Rover L316 2005~2016 All
    L319 2005~2016 All
    L320 2005~2016 All
    L322 2005~2016 All
    L359 2005~2016 All
    L405 2005~2016 All
    L494 2005~2016 All
    L550 2005~2016 All
    L538 2005~2016 All
  Jaguar X100 2005~2016 All
    X150 2005~2016 All
    X152 2005~2016 All
    X202 2005~2016 All
    X250 2005~2016 All
    X350 2005~2016 All
    X351 2005~2016 All
    X400 2005~2016 All
Pathfinder Land Rover L405 2017~latest All
    L494 2017~latest All
    L462 2017~latest All
  Jaguar X152 2017~latest All
    X761 2017~latest All
    X760 2017~latest All
    X260 2017~latest All
Note: All JLR models produced after 2016 are applicable for pathfinder software, SVCI DoIP device will constantly update and support the latest JLR models.
II. How to use and operate SVCI DoIP?
If you want to use the SVCI DoIP device normally, you have to download and install three software, they are Pathfinder, SDD2 and SDD2 "QuickLoader" software. These three software can be installed in the same operating system together, and when you use SDD2 software,  you have to open it from the SDD2 "QuickLoader" software. And when the software is installed, the device needs to be connected to the laptop and vehicle. The Pathfinder software is primarily intended for Jaguar Land rover models manufactured in 2017 and beyond, The SDD2 software is mainly aimed at Jaguar Land rover 2016 years models and before.
2.1 Download and install software
2.1.1 Installation steps of the PATHFINDER software:
Step 1: Before installing the software, you need to make sure the C drive has a capacity of more than 250GB.
Step 2: Access to software download center
Step 3: Select “Pathfinder” item and download pathfinder installer
Step 4: Double-click the file that you download and saved, and then install it.
Step 5: The pathfinder installer will automatically prompt you to download and update the software and files you need to install pathfinder(The automatic download and installation will takes up to 24 hours according to network download speed).

2.1.2 Installation steps of the SDD2 and SDD2 "QuickLoader" software:
Step 1: Download software from
Step 2: Select the “SDD_xxx_Full.exe” file, download and save it.
Step 3: Double-click the “SDD_xxx_Full.exe” file and install it.
Step 4: Select SDD2-"QuickLoader" item from
download and install it.
Step 5:Double-click the “SDD2 "QuickLoader.exe” file and install it.

2.2 Device Connection
After installed the software, you need to connect the equipment to the computer using a USB cable. Then connect the OBD interface of the vehicle through SVCI DoIP device, or connect the OBD interface of the vehicle and the equipment through the OBD extension cord. The equipment connection diagram is shown as below.
3.1 What is SVCI DoIP ?
SVCI DoIP is a special vehicle inspection tool for Jaguar Land rover models, it is manufactured by BAOCHI.
3.2 What does SVCI DoIP do?
SVCI DoIP hardware is compatible with SDD2 and Pathfinder software, which can achieve all the functions of these two software, it includes diagnostic, program ,immobilizer, change CCF configuration and special function etc. By the way, SVCI DoIP can achieve all of the original DoIP device function.
3.3 Is there a version limit for SVCI DoIP to use SDD2 and pathfinder software, and can they be used for free?
SVCI DoIP hardware is compatible with all versions of SDD2 and pathfinder. The software is free to use, and SDD2 software can be run without registration.
3.4 When to use SDD2 software and when to use pathfinder software?
Use the SDD2 software when you come across a JLR vehicle from 2005-2016,When you come across the Jaguar Land rover models produced after the 2017 model year, you need to use the Pathfinder software.
3.5 What are the advantages of SVCI DoIP?
SVCI DoIP hardware equipment is suitable for all Jaguar Land rover models of the year, and it can achieve all Jaguar Land rover functions. SVCI DoIP hardware itself is small and easy to take. In addition, there are several advantages:
1) High speed host communication. (3M bps)
2) Stable host communication. (with RTS/CTS flow control)
3) Automatically register software.
4) Online software update and keep software latest always.
5) Online firmware update.

Package includes:
1pc x SVCI DOIP JLR DoiP VCI Hardware
1pc x Software CD
1pc x USB cable
1pc x User manual
1pc x Outer packing
1pc x OBD extension cord

Scan QRCode,order anywhere and anytime

何か質問があれば、 お気軽にお知らせください。

Live Support: Chat with us online

また 製品を安全に送るために、
もし 商品は損傷があれば、損傷を受けた証拠を開いてください。
そして パッケージと損傷を受けた商品の写真を送ってください。