Lonsdor

SKE-LT Smart Key Emulator 5 set for Lonsdor K518ISE Key Programmer

在庫あり. History 1 sold. Item No. SK213-1-SK213-5

今買う: 42,900
運送:
送料無料 エクスプレス配送サービス    配送時間:3-5営業日.詳細?
重量:
0.5KG
返品:
7日以内に返品できますが、ただお客様は運賃を払います。 詳細?

製品説明

SKE-LT Smart Key Emulator introduces brand new functionality for work with Toyota/Lexus vehicles equipped with Smart Key Systems via OBD, without dismantle. Main objective of the software is to allow addition of smart keys in "all keys lost" situation by creating emulator which allows to get permission to register new keys via diagnostic equipment.
SKE-LT Smart Key Emulator for Lonsdor K518ISE Key Programmer

良いニュース: 2018年10月のLonsdor推進計画
1.購入SK213 + SK213-1セットはSK213-5を無料で送ることができます。
2.すでにSK213をお持ちの場合は、SK213-1を購入したいだけです。このパッケージを購入すると、229USDでSK213-5を無料で送ることができます。(SK213+SK213-5F)
3.既にSK213 + SK213-1のスーツを持っていて、ただSK213-5を購入したいのであれば、現在は60USDしか必要ではありません。
注:プロモーションの時間は2018年10月30日までです。急いでお見逃しなく。


SKE-LT Introduction:
Product name: SKE-LT Smart Key Emulator
Battery standard: CR2032=3V(Please install battery)

SKE-LT Smart Key Emulator Functions:

Bind emulator key: first use, it is required to bind SKE-LT emulator to K518ISE main unit;
Backup EEPROM data: backup on board computer immodata;
Make emergency emulator key: with the backup immodata to make the designated SKE emulator key to the key that can replace the original master key.
Such key can be used to turn on the ignition, then add smart key can be proceed;
Add smart key: to add a smart key.
Delete smart key: to delete a programmed key.

Lonsdor K518ISE can program Toyota/Lexus smart key all key lost via OBD by working together with extra SKE-LT Smart Key Emulator(optional)

SKE-LT: Smart Key emulator - Toyota/Lexus smart key for all key lost via OBD.(optional)
Black:  SKE-LT-DST40(94/D4) -Supports 94/D4 smart key.(optional)
Red: SKE-LT-8A(88/A8)-Support 88/A8 smart key.(optional)
Green: SKE-LT-DST80(98)-Supports 98 smart key.(optional)
Blue: SKE-LT-8A(A9)-Supports A9 smart key. (optional)
Orange: SKE-LT-DSTAES Chip 39 (128bit) for Toyota 39 chip smart key all keys lost by OBD
Support Offline Calculation

Feature:
1.All key lost Support
2.Don't need to connect internet

1. Press and hold the power button for 2 sec to turn on/off; In start status, when standby for 2 min,
the key will automatically shut down; After switching 3 times, the key will be initialized, and can be recycled again.

2. Status indicator: Blue-normal; Red-hardware failure;

3. After receiving the product, please open the back cover of each emulator and install battery first before using it.

Steps to install battery:

How to Operate the SKE-LT Smart Key Emulator on all key lost situation:

1)  Binding
1. Go to the “Bind emulator key” function;
2. Turn on emulator key and put it into K518ISE key slot (put the status indicator down, make sure the key is active);
3. Following the system direction and click “OK” to start binding;
4. After binding completed, the system will indicate”Binding successful”.

2)  Backup EEPROM data
Connect K518ISE with car OBD port, enter into "Backup immodata" to back up the data.

3)  Make emergency emulator key
After choosing the immodata, in a network environment, the system will indicate to choose the corresponding SKE emulator key model,
please start the key and put it into K518ISE key slot(make sure the key is activate), follow the instruction to make an emulator key.

4)  Add smart key

Click the car start button, put the generated SKE emulator key close to the start button, with induction the car will automatically activated.
The system will read current key count, then follow the instruction to add key.


Precaution
1.“Bind emulator key”can identify the SKE emulator key binding state;
2. SKE emulator key need to bind K518ISE host and can bind only for one time;
3. When making emulator key, make sure well net connection and to choose the corresponding SKE emulator key model correctly.


Package List:

1*SKE-LT Smart Key Emulator


Scan iobd.jp QRCode,order anywhere and anytime



 
お問い合わせ
何か質問があれば、 お気軽にお知らせください。

Live Support: Chat with us online
Email: sales@iobd.jp
Skype: sales_95193
Tel:+8613628695107
Whatsapp:+8613628695107

ご注意ください
製品を安全に送るために、電話番号が必要です。ご注文する時、電話番号を教えてください。
また 製品を安全に送るために、
パッケージに署名する前に、損傷があるかどうかを二重にチェックしてください。
もし 商品は損傷があれば、損傷を受けた証拠を開いてください。
そして パッケージと損傷を受けた商品の写真を送ってください。

 
Buy more and Save more