2018.07V MB SD BEZN C6 OEM DOIP Xentry Diagnosis VCI Multiplexer With HDD

在庫あり. Item No. SP332

今買う: 80,345
プレクリスマスセール
店舗全体の6%割引---カートに入れる、直接値引きする
500 USD以上のご注文、無料ギフトをプレゼント--- U480コードリーダー
SP332+SP332-S
運送:
エクスプレス配送サービス    配送時間:3-5営業日.詳細?
重量:
3.8KG
返品:
7日以内に返品できますが、ただお客様は運賃を払います。 詳細?

製品説明

Mercedes Benz C6 OEM Xentry diagnosis VCI DOIP Pass thur interfac is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the XENTRY software loaded on a PC.
BEZN C6 OEM DOIP Xentry Diagnosis VCI Multiplexer With HDD
 

Mercedes Benz C6 OEM Xentry diagnosis VCI DOIP Pass thur interfac is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the XENTRY software loaded on a PC.


Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface Benz C6 Overview:

Compatible Software: VXDIAG For XENTRY/Das Software
Support Vehicle: Mercede For Benz & Smart vehicles
DoIP: Support DoIP
Functions: Star Diagnostic & programming (SCN Coding)


What is DOIP?

DOIP is ISO 13400 diagnostic protocol

ISO 13400-1:2011 describes the general use cases and communication scenarios which are covered by an Internet Protocol-based vehicle communication standard. Each use case drives specific communication capabilities of the vehicle communication interface, for instance in order to be interoperable in an existing computer network.

The diagnostic communication over Internet Protocol (DoIP) protocol supports the standardized service primitive interface as specified in ISO 14229-2.

The descriptions in ISO 13400-1:2011 cover different application layer implementations, such as:

enhanced vehicle diagnostics (system diagnostics beyond legislated functionality, non-emissions-related system diagnostics);
WWH-OBD (World-Wide Harmonized On-Board Diagnostics) as specified in ISO 27145-2 and ISO 27145-3.

The mercedes  Land Rover JLR all use this new Diagnostic Protocol now.


Where need DOIP device?

when we test mercedes new car like w222  w205

In Audio\Comand section you can find DoIP test page.
If cable is DoIP you will see green mark that DEVICE is Ok.
Xentry will prompt you that other device must carry yellow marks.

Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6  Features:

    Can be used for all model series of For Mercedes For Benz vehicles
    Support DoIP, cover more functions during SCN Coding than SD C4/C5
    Functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on
    Diagnosis updates no longer necessary – firmware updates required on rare occasions
    Does not need a power supply unit for external power supply
    Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
    Engines (All Gasoline & Diesel Systems)
    Transmissions and Electronic Selector Modules
    Airmatic and Active Body Control Suspension Systems
    Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
    Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
    Drive Authorisation System
    Sam (Signal Acquisition) Modules
    Electronic Ignition System (EIS)
    Pneumatic System Equipment and ATA functions
    Air Conditioning / climate control Systems
    Instrument Cluster
    Tyre Pressure Control
    Parktronic System
    Keyless Go
    D2b Command & Audio Gateway (D2B and MOST networks)
    TV Tuner
    Headlamp Range Adjustment
    Seat Electronics
    Rvc, RST & Vario Roof modules
    Automatic Clutch System ACS
    M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
    Assyst & ASSYST + systems

 

Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 Summary:

Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.
 
The Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.

Notice  :

1.Please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only. If change laptop, software may get broken and need to ship HDD back to us to copy software again.
2.ThisMercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 can/'t support All Key Lost,needs one key at least.


Scan iobd.jp QRCode,order anywhere and anytime


 
お問い合わせ
何か質問があれば、 お気軽にお知らせください。

Live Support: Chat with us online
Email: sales@iobd.jp
Skype: iOBD2.jp
Tel:86 18086619023
Whatsapp:86 18086619023

ご注意ください
製品を安全に送るために、電話番号が必要です。ご注文する時、電話番号を教えてください。
また 製品を安全に送るために、
パッケージに署名する前に、損傷があるかどうかを二重にチェックしてください。
もし 商品は損傷があれば、損傷を受けた証拠を開いてください。
そして パッケージと損傷を受けた商品の写真を送ってください。

 
Buy more and Save more
Optional parts & accessories