Lonsdor K518ISE Key Programmer Plus SKE-IT Smart Key Emulator Orange
Lonsdor K518ISE Main Functions & Features:
Built-in Volkswagen 4th 5th adapter
Built-in Chip & remote detection module.
Free BMW FEM key programming
Supported Car Models:Lonsdor Key Programmer Supported Car List
Language: English only at present.
K518ISE key programmer features:
1.The best car diagnostic tool based on Android
2.WIFI networking ensures software upgrading more convenient.
3.No need to plug memory card, or connect the computer with data cable, more flexible in online upgrading, updating and activating.
4.with USB-B2.0 standard connector, OBD-II test cable integrated with the diagnostic connector function of the adapter.
5.Diagnostic speed greatly accelerated, work efficiency improved, better time
6.7 inches high brightness, high definition color IPS capacitive screen
7.3800mAh polymer battery
8.Support external memory expansion, better within 32G
9. Built-in professional, powerful operation assistant system
10.Free BMW FEM key programming
K518ISE key programmer Function Description:
1.Please pay attention to below function description before using the device. Immobilization: immobilizer system diagnosis
2.Odometer adjustment: mileage diagnosis and correction
3.Hardware testing: test if the hardware can function well
4.Adapter: after dismantling, diagnose certain car models
5.Setting: set up basic device information
6.Update firmware: adapter firmware upgrade & update (connect KPROG adapter
7.with OBD test cable and connect K518ISE with 12V power supply)
8.One key upgrade: click to update to the latest system data
9.Shutdown - turn off the device
Lonsdor K518ISE Key programmer Special Features:
Volvo (S40, S60, S80, XC60, XC90, C30, C70, V40, V60, V70) key programming.
Toyota/Lexus: smart key all key lost - via OBD ( without dismantle)
BMW CAS3/CAS3+/CAS3++: direct OBD programming
BMW CAS4/CAS4+: dismantle & read data programming
16 -New Maserati: smart key programming
16 -New Ford: smart key programming
Hyundai / Kia 46/47/8A smart key: PIN code reading via OBD, all key lost included.
Renault ( Megane, Koleos, Scenic) without PIN code key programming
VAG group 4th & 5th immobilizer system
Ferrari (458, F12, F149): direct OBD programming
Peugeot /Citroen: two ways to read PIN code & programming, all keys lost included.
Lonsdor K518ISE Cars Coverage List for Immobilization:
Audi, BMW, Benz, VW, Volvo, Citroen, Ferrari, Maserati, Fiat, Lamborghini, Jaguar, MG,
Land Rover, Bentley, Lancia, Opel, Peugeot, Porsche, DS, Renault, Alfa Romeo, Smart,
Cadillac, Chevrolet, Dodge, GMC, Buick, Hummer, Ford, JEEP, Lincoln, Mercury
Honda, Hyundai, Isuzu, KIA, Lexus, Mazda, Mitsubishi, Nissan, Ssangyong, Subaru, Suzuki,
Toyota, Shigaoka Queen
Iveco, Trumpchi, BYD, Geely, Chery, Great Wall, Young Lotus (Basically all Chinese car
models are included)
Odometer Adjustment Car List:
VW, Porsche, Ford, Jaguar, Land Rover, Mazda, Audi, Renault, Hummer, Hyundai, Kia...
More high-end cars will be updated very soon.
Note: K518ISE is still under rapid upgrading, more functions and be released soon,
please refer to our website www.lonsdor.com foalso you can “One key update” for the latest version by yourself.
|RFID||Support: 125KHz ASK; 134.2KHz FSK|
|CPU||ARM Cortex-A7 Quad-core Processor Speed 1.34GHZ|
|Power supply||DC12V 1A|
|WIFI communication distance||10m|
|Display||1024x600, 7 inch IPS capacitive screen|
-- . +
|Memory||eMMC 8G RAM 1G|
|Com port||USB2.0-type B|
|OBDII protocols||ISO15765, ISO9141, ISO14230, SAEJ1850, KW1281, VW TP1.6 TP2.0 etc.|
|KPROG||support programming MCU and EEPROM on ECU circuit board.
How to Operate the SKE-LT Smart Key Emulator on all key lost situation:
1. Go to the “Bind emulator key” function;
2. Turn on emulator key and put it into K518ISE key slot (put the status indicator down, make sure the key is active);
3. Following the system direction and click “OK” to start binding;
4. After binding completed, the system will indicate”Binding successful”.
2) Backup EEPROM data
Connect K518ISE with car OBD port, enter into "Backup immodata" to back up the data.
3) Make emergency emulator key
After choosing the immodata, in a network environment, the system will indicate to choose the corresponding SKE emulator key model,
please start the key and put it into K518ISE key slot(make sure the key is activate), follow the instruction to make an emulator key.
4) Add smart key
Click the car start button, put the generated SKE emulator key close to the start button, with induction the car will automatically activated.
The system will read current key count, then follow the instruction to add key.
1.“Bind emulator key”can identify the SKE emulator key binding state;
2. SKE emulator key need to bind K518ISE host and can bind only for one time;
3. When making emulator key, make sure well net connection and to choose the corresponding SKE emulator key model correctly.
1*SKE-LT Smart Key Emulator
1* Portable Bag(big)
1*OBD Test Cable