エアバッグの照明を暗くになってほしい？エアバッグリセットはエラーコードを消すこと、サービスインターバル（service interval）のリセットすることができます。iOBD2.jpはいろいろ強力なツールを提供しています。例えば、10 In 1 Service Reset, Airbag Resetting and Anti-Theft Code Reader, OBD2 Can Bus Service Interval Reset, and other professional airbag resetters for BMW, Benz, VW, Audi, Opel,などです。
Models available for most BMWs built between 1994 and 2003
Displays all SRS fault codes, tells you what's wrong.
Resets the "SRS" Light.
W211/R230 ABS/SBC TOOL (Repair Code C249F) for Mercedes Ben z cars have W211 and R230 with ABS SBC system.
VW/Audi (VAG) Service Light Reset (SLR) tool re-sets service lights on Volkswagen and Audi vehicles, including the latest CAN vehicles with Conditional Based Servicing (CBS). Many VW and Audi vehicles feature the ability to adapt the oil change interval to driving conditions, with Standard and Long Life oil change settings. This reset tool has been developed with "Long Life Oil" service interval functionality. In addition to service light reset, the tool extinguishes the airbag (SRS) warning lamp across the complete VW/Audi range of vehicles.
Audi-VW Airbag Reseter works without additional computer and trough car OBD II connector can erase airbag sensor "crash data" or only fault memory.
The ATM adapter suppports:
- 35080 35160 DQW080 DQW160 35080V6 VP,
- parallel FLASH Zhiwei anti-theft cancellation,
- 8-pin chip,
- ATMEGA re-use
Attention :The ATM adapter cannot be used alone; it must be used together with CG100 PROG III Airbag Restore Devices.
Special BDM+3 Adapter for CG100 Airbag Restore Devices Renesas Infineon
CG100 software version over 3.0, must use this new BDM+3 Adapter to update.
CG100-airbag tool exclusively designed to read Tricore MCU’s over CAN-bus.Supports Read/Write EEPROM function for secured and non-secured SAC-TC1766 SAC-TC1767 SAC-TC1796 SAC-TC1797 microcontrollers.comes with Mileage, DPF, ECU system time, ISN built-in calculators.Edit CRC Eeprom.
BENZ SBC TOOL W211/R230 ABS/SBC TOOL
Airbag Reseter works without additional computer and trough car OBD II connector can erase airbag sensor "crash data" or only fault memory.
Very simple user instruction: connect this tool to car OBD II connector.
Right red button is for airbag "crash data" erase.
Left yellow button is for erase airbag "fault memory" or "errors".
Reset Inspection and Oil Service. Work with BMW build 1982-2001 with 20 pin diagnostic socket located in the engine...
New OBD2 CAN BUS Service Interval and Airbag Reset is used exclusively to reprogram the service intervals
VT8 VW AUDI Autodigital SRS Tool used for vag car model airbag reset, repair and clear trouble codes.
SI-Reset MB38 service intervall reset works with Mercedes Benz cars with 38 pin connector except ML class, it helps resets the Service Indicator (Service Intervall) , and delete airbag faults (if your airbag warning light is on you can turn it off with this tool, if the error is not a permanent one)